Private Water Supply: Who Checks It, and How Often
TL;DR: A private water supply has no water company behind it, so the legal duty sits with whoever owns or controls it, and the regulator is the local authority rather than the Environment Agency or Ofwat. About 1% of England’s population drinks from one. The smallest supplies are tested once every five years, and of the 13,092 supplies that require a risk assessment, only 39.3% have one in date and 29.1% have never had one at all. In 2024, 4.46% of private water supply tests found E. coli.
Last updated: 29 July 2026
On this page
Key takeaways
- A private water supply is any supply not provided by a water company where the water is intended for human consumption. About 1% of England’s population uses one.
- The regulator is the local authority, not the Environment Agency or Ofwat. The Drinking Water Inspectorate provides the technical guidance and the risk assessment tools.
- Regulation 6 of the 2016 Regulations requires a risk assessment. Of 13,092 supplies that need one, only 39.3% have one in date and 29.1% have never had one.
- Small supplies are monitored at least every 5 years, and more often only if the risk assessment says so.
- Regulation 10 monitoring covers conductivity, enterococci, E. coli, hydrogen ion and turbidity. Three of those five are continuously measurable.
- In 2024, across 229,216 analyses, 4.46% of private supply tests found E. coli and 10.31% found coliform bacteria.

What is a private water supply?
A private water supply is any supply not provided by a water company where the water is intended for human consumption, or for a food business that could affect the final product. In practice that means a borehole, a well, a spring or a watercourse, usually in a remote rural area, feeding anything from one cottage to a caravan park, a brewery, a school or a hotel.
The Drinking Water Inspectorate puts the scale at about 1% of the population of England, and 3% in Wales. That sounds marginal until you notice what the percentage conceals. A public supply is engineered, treated, monitored continuously and backed by a company with statutory duties. A private water supply may have none of those things, and the person legally on the hook is often a farmer or a landlord who has never been told they are one.
The governing instrument for a private water supply in England is the Private Water Supplies (England) Regulations 2016, as amended in 2018. It sets the wholesomeness standards, the duty to risk assess, and the monitoring regime.
Who actually regulates it
The local authority. Not the Environment Agency, which regulates abstraction and discharge, and not Ofwat, which regulates water companies. Your district or unitary council’s environmental health team carries out the risk assessments and takes the samples, and it is the body that will serve a notice if a private water supply fails.
The Drinking Water Inspectorate sits above that as the technical authority. It publishes the guidance, builds the risk assessment tools local authorities use under regulation 6, and collects the annual data return that tells us how the system is doing.
This split matters more than it sounds. It means enforcement capacity varies council by council, and it means nobody is watching the supply between visits. On a public supply the undertaker is monitoring continuously and is accountable for it. On a private water supply, the gap between two regulatory visits can be five years, and nothing fills it.
The three categories and what each triggers
The Regulations sort every private water supply by size and by whether the water is part of a commercial or public activity. That sorting decides how often anyone looks.
| Category | What it covers | Monitoring |
|---|---|---|
| Regulation 9 | Large supplies, and any supply used as part of a commercial or public activity | Check monitoring plus less frequent audit monitoring, per Schedule 2 |
| Regulation 10 | Other private supplies, including small domestic ones | At least every 5 years, more often only if the risk assessment requires it |
| Regulation 8 | Private distribution systems fed from a water company main | Risk assessment based |
| Single dwelling | One owner-occupied property, not commercial or public | Only on request by the owner or occupier |
Read the last row again. A single dwelling on its own private water supply is monitored only if the owner asks. That is a deliberate policy choice about proportionality, not an oversight, but it means a household can drink untested water indefinitely and be entirely within the law.
The risk assessment gap
Regulation 6 requires a risk assessment, reviewed at least every five years. The Drinking Water Inspectorate’s 2024 data return shows how that is going, and the numbers are the most striking thing in the whole regime.
- 13,092 supplies require a risk assessment.
- 5,143, or 39.3%, have one that is in date.
- 31.6% have exceeded the five yearly review requirement.
- 29.1% have never had a risk assessment at all.
The breakdown by category makes it worse rather than better. Regulation 9 supplies, the large and commercial ones where the consequences of failure reach the most people, sit at 45.9% in date. Regulation 10 supplies are at 27.8%, and private distribution systems under regulation 8 at 25.5%.
None of that is a criticism of environmental health teams, who are doing this alongside food safety, housing and noise on stretched budgets. It is a structural observation. A regime that depends entirely on a visit is only as good as the visit rate, and the visit rate is 39.3%.

What the sampling actually finds
When samples are taken, they find things. Across 229,216 private water supply analyses in 2024, 4.46% of tests detected E. coli, down from 4.93% in 2023, and 10.31% found coliform bacteria, down from 13.20%. Both are moving in the right direction and both remain high in absolute terms.
For scale, the Chief Inspector’s 2025 report for England, published on 7 July 2026, records 99.97% compliance across public water supplies, with 3,632,669 microbiological tests producing three E. coli detections at treatment works and four at service reservoirs.
Those two sets of figures are not a like-for-like comparison and should not be read as one. They cover different years, different sampling points and different regimes: a public supply is sampled at works, service reservoirs and consumer taps under a fixed programme, while private supply analyses are taken where and when a council can get to them. The direction of the difference is still unmistakable.
What continuous monitoring can and cannot do
Start with the limit. No continuous sensor measures E. coli or enterococci. Those require laboratory culture, and any product claiming to give you a live bacteriological result for a private water supply is misrepresenting itself. Continuous instruments do not replace the statutory sample.
Now look at what regulation 10 monitoring actually lists: conductivity, enterococci, E. coli, hydrogen ion and turbidity. Two of those five need a lab. The other three are exactly what a continuous multi-parameter instrument measures, every few minutes, for years.
That is the practical case, and it is narrower and more honest than the usual pitch. Continuous data will not tell you the water is safe. It will tell you when something changed: a turbidity spike after heavy rain, which is the classic route for surface contamination to reach a spring or a shallow borehole, a conductivity shift indicating a different water entering the system, a pH excursion, a level drop, or a UV or chlorination plant that has stopped doing its job.
Those are the events a five yearly sample will almost certainly miss, and they are the ones that precede a bad result. A multi-parameter instrument on the raw side and a chlorine analyser after treatment give a private water supply owner the one thing the regime does not: a record of the days nobody visited. The method is set out in our continuous water quality monitoring guide and the parameter detail in our turbidity and pH compliance guide.

Five checks if you rely on a private supply
- Establish which category you are in. A holiday let, campsite, brewery, farm shop or village hall makes the water part of a commercial or public activity, which moves you to regulation 9 and a much heavier monitoring regime.
- Ask the council for your risk assessment date. Given that 29.1% of supplies have never had one, there is a real chance the answer is that no assessment exists.
- Find out what your last sample said, and when. A private water supply result from four years ago is a historical document, not a status.
- Know your baseline. Turbidity and conductivity are only useful if you know what normal looks like for your source through a full year of weather.
- Watch the treatment, not just the water. A UV lamp at end of life or a dosing failure produces no taste, no smell and no visible change.
Frequently asked questions
What counts as a private water supply?
Any supply not provided by a water company where the water is intended for human consumption or for a food business. Boreholes, wells, springs and watercourses all qualify. So does a private distribution system that takes mains water and redistributes it, which falls under regulation 8.
Who is responsible for a private water supply?
The owner or the person in control of it, with the local authority as regulator. The Environment Agency and Ofwat have no role here. The Drinking Water Inspectorate provides technical guidance and the risk assessment tools that councils use, but it does not inspect individual supplies.
How often is a private water supply tested?
Under regulation 10 it is at least every five years, and more frequently only if the risk assessment shows that to be necessary. Regulation 9 supplies, meaning large ones and those serving a commercial or public activity, get check monitoring plus less frequent audit monitoring. A single dwelling is sampled only on request.
Does a single house on a borehole need a risk assessment?
Not automatically. A supply serving one owner-occupied property, not used as part of a commercial or public activity, is monitored only if the owner or occupier asks. That is a proportionality decision in the Regulations, and it is why the population drinking untested water is larger than the sampling figures suggest.
Can sensors replace private water supply sampling?
No. Bacteriological parameters require laboratory culture and the statutory sample is the statutory sample. Continuous instruments cover conductivity, pH and turbidity, three of the five parameters regulation 10 lists, and their job is to flag the change between visits rather than to certify the water.
Five years is a long time to look away
The private water supply regime is not badly designed. It is proportionate, risk based, and it puts effort where the most people are served. What it cannot do is see anything between visits, and on a source that responds to rainfall within hours, that is where most of the risk lives.
If you own or manage a private water supply, the useful question is not whether you are compliant. It is what you would be able to show if someone got ill. For related reading see our drinking water quality monitoring page, the water quality parameters guide, and our water quality monitoring service.


Running a borehole, spring or well that feeds people? Talk to AQUAIOT about what to measure on a private water supply, where to put it, and what a defensible record looks like.

