Leak detection for leisure centres and pools
Tell a real leak apart from the humidity of the pool hall.
Moisture, flow and freeze monitoring with automatic shut-off across pool plant, chemical dosing, changing rooms and risers. AQUAIOT catches a genuine leak in a humid public building before it closes the pool and disrupts a packed timetable.
Live monitoring. Automatic shut-off.
38Sensors OK
2Caution
1Isolated
Live zones
Plant room – moistureDryOK
Riser 3 – flow14.8 L/minIsolated
Roof tank – temp4.2°CFreeze risk
Incoming main – flowNormalOK
Humidity hides a genuine leak.A pool hall is wet by design, so condensation and splash mask the moisture that signals a real failure, and a manual eye cannot tell the difference until damage shows.
Pool downtime disrupts a packed timetable.A leak that forces a pool closure cancels lessons, clubs and public sessions, hitting revenue and the community programme the centre is there to run.
Chemical systems raise the stakes.Water reaching chemical dosing, electrics or plant is a safety event, not just a repair, and a leak around these systems must be caught and isolated fast.
Plant runs hard and weeps at fittings.Circulation pumps, balance tanks and filtration run continuously and weep at joints, so the risk is constant while scheduled inspections see only a moment.
The AQUAIOT SolutionRequest a Consultation
Leak detection for pools, plant and chemical systems
A leisure centre runs water everywhere, from the pool tank and circulation plant to chemical dosing and busy changing rooms, all in a building thick with humidity that masks a real leak. AQUAIOT senses moisture where it matters, watches flow on plant and supply lines for an abnormal loss the humidity hides, and isolates the supply automatically before a genuine leak floods plant or closes the pool to the public.
Sense across pool plant and chemical systems. Point sensors at circulation plant, balance tanks, chemical dosing rooms and changing areas, with flow analytics on plant and supply lines that read through high humidity.
Isolate before plant or the pool hall floods. Auto-isolation valves cut the supply the moment an abnormal-flow or moisture threshold is crossed, protecting plant, electrics and chemical stores from a real leak.
Give a public-building operator a clear record. Every reading and isolation event is timestamped and exportable, supporting safety reporting, planned maintenance and insurer reviews.
Live leak status
Auto-isolation valve closed – Riser 3
Abnormal flow detected 03:14. Supply isolated, team notified.
Abnormal flow detected 03:14. Supply isolated, team notified.
How It Works
Three steps from first drop to evidence
Step 01
Detect
AQUAIOT moisture, flow and freeze sensors are deployed at the points water escapes. Every reading is timestamped and logged to the cloud over secure cellular or LoRaWAN telemetry.
Step 02
Alert and isolate
When moisture is sensed or flow goes abnormal, AQUAIOT raises an immediate alert by SMS, email and app, and closes the auto-isolation valve so water is stopped before damage spreads.
Step 03
Record
Every reading, alert and isolation event is captured in exportable, timestamped logs that integrate with CAFM and BMS, so evidence for insurers is ready on demand.
Capabilities
Everything a leak detection programme needs
Purpose-built for estates, facilities and risk teams protecting buildings against escape of water across single or multiple sites.
Moisture sensing at the risk points
Point, rope and tray sensors detect water at first contact under appliances, in plant rooms, risers and tank rooms, before it spreads.
Inline flow analytics
Continuous flow monitoring on the incoming main learns normal use and flags the slow weep or continuous draw a manual check never sees.
Freeze protection
Temperature monitoring on exposed and loft pipework warns before a freeze leads to a burst, so action can be taken in time.
Automatic shut-off
Auto-isolation valves close the supply the moment a moisture or abnormal-flow threshold is crossed, with manual remote override for the duty holder.
Multi-channel alerts with escalation
SMS, email and app alerts with role-based routing, so the right person responds day or night, on a single site or across a portfolio.
Open integration, no lock-in
Connects to BMS, CAFM and SCADA via RS485/Modbus or REST API, with audit-ready exportable records for insurers and owners.
Evidence & Assurance
Evidence your insurers and auditors expect.
Audit-ready event logs Humidity-tolerant sensing Plant-room auto shut-off Secure cellular and LoRaWAN telemetry
Book a Demo
No commitment. Talk to our engineering team.
Questions & Answers
Common questions
How does AQUAIOT tell a real leak from pool humidity?
Flow analytics watch plant and supply lines for an abnormal loss that humidity cannot create, while moisture sensors are placed and configured for high-humidity areas so condensation and splash do not trigger a false alarm.
Where are sensors placed in a leisure centre?
Point sensors sit at circulation plant, balance tanks, filtration, chemical dosing rooms, changing areas and risers. Flow analytics watch plant and incoming supplies for slow losses.
Can the water be shut off automatically?
Yes. Auto-isolation valves close the supply the moment a moisture or abnormal-flow threshold is crossed, protecting plant, electrics and chemical stores, with an immediate alert to the duty team.
Will installation disrupt swimming sessions?
No. Sensors and clamp-on flow monitoring are non-invasive and retrofit-friendly, so there is no pipe cutting and work can fit around the public timetable.
How does monitoring support safety and maintenance?
Every reading and isolation event is logged and exportable, giving operators a timestamped record of proactive management for safety reporting and insurer reviews. The duty holder retains responsibility for the safety regime.
Explore the AQUAIOT range
Related leak detection pages
Ready when you are
Keep the pool open and the plant dry. Talk to an engineer.
Tell us about your pool plant, chemical systems and building layout, and we will scope leak detection and automatic shut-off for the centre.
Leisure centre leak detection – Speak to an AQUAIOT engineer about your buildings.
Speak to an Expert